SLR series continuous powder metallurgy mesh-belt high temperature sintering furnace
SLR series continuous powder metallurgy mesh-belt high temperature sintering furnace
Categories | Powder metallurgy electric furnace series |
---|---|
Brand | Lary |
Model | SLB series |
Product name | sintering furnace |
Application | Powder Metallurgy |
Preheating temp. | 850℃ |
Sintering temp. | 1150℃ |
Belt width | 300-610 or Customized |
Heating power | 162-312KW or Customized |
Material of Muffle | Stainless steel or ceramic or Customized |
Control chamber | Customized |
Temperature Uniformity | ±5℃ |
Heating element | SIC or Customized |
FOB port | Ningbo |
Terms of Payment | T/T |
Update Time | Dec 4,2024 |
SLB seriestransformer curing oven
Keywords:sintering furnace、hightemperature electric furnace、sinteringfurnace for powder metallurgy、hightemperature vacuum furnace、ultrahigh temperature furnace、hightemperature electric furnace
Product attributes:
Productname: sintering furnace
Application: Powder Metallurgy
Preheating temp.: 850℃
Sintering temp.: 1150℃
Belt width: 300-610 or Customized
Heating power: 162-312KW or Customized
Material of Muffle: Stainless steelor ceramic or Customized
Control chamber: Customized
Temperature Uniformity:±5℃
Heating element: SIC or Customized
Pictures:
Features:
1)The complete equipment is composed of furnace body, mesh-belt transmissionsystem, temperature control system, and atmosphere control system.
2)The furnace body is composed of feeding section, pre-sintering section,sintering section, slow cooling section, water cooling and discharge section.
3)The pre-heating section adopts heating resisting metal muffle, which is dividedto three sectors to control temperature and heated by resistance wire or gas.
4)The sintering section adopts muffle made of silicon carbide combining withsilicon nitride (SiC+Si3N4), which is divided to threesectors to control temperature and heated by silicon carbide rod (SiC).
5)The mesh-belt transmission system is composed of imported SUS314high-temperature resisting mesh-belt and transmission devices.
6)The running speed of mesh-belt can be adjusted by frequency converter. There isa speed sensor with digital display to readout the speed of mesh-belt.
7)The temperature control system, which forms closed loop control system torealize automatic accurate temperature control, is composed of thermocouple,intelligent PID regulator with digital display and silicon controlledrectifier.
8)The gas flow meter displays the flow rate of protective atmosphere. The ratesof all kinds of atmosphere can be adjusted according to process requirement.There is an under pressure alarm system for atmosphere. In case of the pressureof atmosphere is under the setting value, the system gives out sound and lightalarms.
9)The temperature of cooling water is automatically controlled by the make andbreak of magnetic valve controlled by temperature controlling elements.
10)The electric control cabinet is completely sealed to guard against conductivedust. The heat exchanger or air conditioner in it can lower the workingtemperature of electrical components so as to raise the reliability ofcontrolling system.
Specification:
| SLR-300 | SLR-350 | SLR-450 | SLR-610 |
(mm) | 300 | 350 | 450 | 610 |
Preheating temp (℃) | 850 | 850 | 850 | 850 |
Sintering temp (℃) | 1150 | 1150 | 1150 | 1150 |
Heating power (KW) | 162 | 198 | 252 | 312 |
Temperature Uniformity (℃) | ±5 | ±5 | ±5 | |
Speed of belt (mm/min) | 80 | 100 | 100 | 120 |
Output (kg/h) | 100 | 120 | 150 | 300 |
Atmosphere Protect | Cracked Ammonia furnace、Nitrogen generator | Cracked Ammonia furnace、Nitrogen generator | Cracked Ammonia furnace、Nitrogen generator | Cracked Ammonia furnace、Nitrogen generator |
Material of belt | SUS314 | SUS314 | SUS314 | |
Heating Element | Sic | Sic | Sic | Sic |
Customerscan install an additional rapid cooling device on the original furnace so as tohardening the powder metallurgy parts. The cooling rate is over 2℃/S and thehardness HRC is over 35.
Application:
SLR series mesh-belt sintering furnace (also knownas mesh-belt powder metallurgy sintering furnace or powder metallurgycontinuous sintering furnace)is mainly used in the sintering of copper-basedand iron-based powder metallurgical product, composite material and bimetallicmaterial. also can be used in the brass soldering and bright heat-treatment ofcooling accessories of auto filter, refrigerator, air-conditioner, stainlesssteel parts, carbon steel parts, brass parts and red copper parts.
Factory:
Company:
Ningbo Lary Industry Technology Co., Ltd is ajoint venture with Portugal TECNIROLO Engenharia Industrial S.A. Lary is anengineering & manufacturing enterprise which inherits the concept ofproviding customers with best services in Europe for more than twenty years. TecniRolo - Portugal andLary Industry - China are a group of companies that work as a global solutionprovider for an international network over of 16 countries.
Certification:
Customers:
Paymentsand Delivering:
Payments: 40% depositby T/T after confirming thedrawings and 60% balance by T/T before delivery.
Delivering: 90 -120 daysafter we confirmed both side.
Contactus:
Amy Ren
Ningbo Lary IndustryTechnology Co., Ltd.
Ningbo
Add: No.9 East ofJingu middle Road, Yinzhou District, Ningbo City, China
Web: www.larytec.com
Tel:0086-754-88033926
Fax:0086-754-88137126
Mob: 0086-13958255267
Email:amy@larytec.com
Welcome to visit us!
- Tel
- *Title
- *Content
- Name:
- Amy Ren
- Tel:
0086-13958255267
0086-574-88033926
- Email:
- amy@larytec.com
- Skype:
- Skype:amyren600
- Address:
- No.9, JinGu Middle Road,Yinzhou District, Ningbo City, China